Inspection & Testing

Statutory LOLER and PUWER examinations — carried out by competent persons, documented to the standard your insurer, the manufacturer and the HSE expect.

Compliance Isn't Optional

Working at height equipment and installed safety systems must be thoroughly examined at defined intervals under LOLER and PUWER. Failure to maintain a current examination record is a criminal offence under the Health and Safety at Work Act — and in the event of an incident, the absence of records is the first thing the HSE will look for. Our inspection service gives you a complete, defensible compliance record.

Safety Wire Systems

Horizontal and vertical lifeline systems, rail systems and fall arrest wire systems inspected to manufacturers relevant standards

PPE Points

Single-point anchor devices, eyebolts and anchor sockets inspected to relevant standards

Collective Guardrail

Edge protection and guardrail systems inspected for structural integrity and compliance

Fixed Access Equipment

Fixed ladders, walkways, step-overs and roof access hatches examined to PUWER & relevant standards

Rope Access Systems

Rope access anchor infrastructure and associated rigging points inspected to relevant standards

PFPE

Personal fall protection equipment — harnesses, lanyards and energy absorbers inspected to BS EN 365 inspected to relevant standards

Safety Wire Systems

Horizontal and vertical lifeline systems, rail systems and fall arrest wire installations must be inspected at defined intervals by a competent person. We carry out thorough examinations of the full range of manufacturer safety wire systems, providing formal written reports with defect classification and recommended remedial actions.

  • MSA Latchways
  • KeeSafety
  • Fall Angel
  • SFS
  • Roodsafe
  • Tractel

PPE Points

Single-point anchor devices, eyebolts and anchor sockets are the critical interface between a worker and the structure. We carry out load testing and thorough examination of individual anchor points to BS EN 795, providing full certification documentation for each device.

  • Eyebolts, anchor sockets and cast-in anchors
  • Resin-fixed and mechanical anchor systems
  • Destructive and non-destructive load testing
  • BS EN 795 Class A and B anchor devices
  • Calibrated hydraulic test equipment
  • Individual test certificate with load data

Collective Guardrail

Edge protection and guardrail systems must be inspected regularly to confirm structural integrity, correct installation and continued compliance with BS EN 13374. We examine the full range of collective edge protection systems, identifying defects, corrosion and installation failures before they become a safety risk.

  • Permanent and temporary guardrail systems
  • Parapet-mounted and free-standing edge protection
  • Post, stanchion and infill panel condition
  • Base plate fixing and structural connection checks
  • Corrosion assessment and coating condition
  • Written inspection report with recommended actions

Fixed Access Equipment

Fixed ladders, walkways, step-overs and roof access hatches are subject to PUWER inspection requirements. We carry out thorough examinations of all fixed access equipment, assessing structural condition, anti-slip surfaces, hardware integrity and compliance with the relevant British Standards.

  • Fixed ladders and cage ladder systems
  • Roof walkways and anti-slip surfaces
  • Step-overs and platform structures
  • Roof access hatches and hardware
  • Corrosion assessment and structural integrity
  • PUWER-compliant written inspection records

Rope Access Systems

Rope access anchor infrastructure and associated rigging points must be inspected and certified to ensure they are fit for purpose before use. We carry out thorough examination and load testing of rope access anchor systems, providing the documentation required to support safe system of work sign-off.

  • Primary and secondary anchor points
  • Structural anchor fixings and embedments
  • Load testing to BS EN 795 and IRATA requirements
  • Rigging point condition & access strategy
  • Post-installation and periodic examination
  • Formal test certificate for each anchor

Personal Fall Protection Equipment

Personal fall protection equipment — harnesses, lanyards, energy absorbers, karabiners and inertia reels — must be inspected before each use by the user and at defined intervals by a competent person. We carry out formal PFPE inspections to BS EN 365 and manufacturer requirements, providing individual item records and a clear pass/fail status for each item.

  • Full body harnesses and sit harnesses
  • Lanyards, energy absorbers and inertia reels
  • Karabiners, connectors and descenders
  • Helmets and head protection
  • Individual item records with serial numbers
  • Clear pass/fail status and lifespan recommendations

Our Approach

How It Works

01

Site Survey & Scheduling

We review your equipment register and installed systems, agree examination intervals and schedule visits to minimise operational disruption.

02

Examination

Our competent persons carry out the examination or inspection in accordance with the relevant regulation and applicable British Standard.

03

Formal Written Report

Every examination results in a formal written report with clear pass/fail status, defect classification and recommended remedial actions.

04

Documentation Hosting

Reports are automatically uploaded to your secure documentation portal with expiry alerts so you never miss a renewal date.

Get Started

Book an Inspection

Get in touch to discuss your inspection requirements. We'll review your equipment register, confirm examination intervals and provide a fixed-price quotation.